COLORADO SPRINGS BATHROOM REMODELER TILE CO

Bathroom Shower Pan

Bathroom Shower Pan

This walk-in shower pan is tiled with a natural stone tile and grouted with Mapei Ultra

Bathroom Remodeler

Bathroom Remodeler

The shower tile installer install ceramic tile for the walls and a glass and metal sheet tile on the feature wall

Bathroom Remodel Contractor

Bathroom Remodel Contractor

The shower tile backer board is Durrock cement board. For this shower we will waterproof all surfaces

Shower Installation

Shower Installation

All of the seams in the shower from top to bottom are waterproofed eliminating any possible leaks that can occur without this protection

Shower Tile Installer

Shower Tile Installer

The feature glass & metal tile is centered at the back wall of the shower and ceramic tile is installed on all the rest of the shower walls

Tile Contractor

Tile Contractor

There are no shower doors on this walk-in shower remodel project. All of the metal edge installation is with Schluter metal edges

Shower Pan Installer

Shower Pan Installer

The shower pan is waterproofed before the tile installation. All of the seams that meet with the wall and pan are taped and sealed. The drain is also given careful attention to seal around the drain opening

Shower Pan Contractor

Shower Pan Contractor

When the waterproofing cures the tile installation can begin. The thin-set mortar needs to be a modified-flexible thin-set to allow for any movement in the pre-made pan

Shower Pan Installers

Shower Pan Installers

Before the waterproofing can be applied to the shower pan, the pan surface must be sanded so that the waterproof product will stick to the shower pan. The tile can be installed after the pan is fully cured

BATHROOM REMODELER Colorado Springs

This bathroom remodeling project came nicely together by adding a few features not typical in most remodeling projects mainly due to budget constraints.

 

In this case, the homeowner's (and tile installers) challenge was to get the most out of the budget which included not changing the footprint of the bathroom.

 

To solve this, the tile installer installed a no curb shower pan so that the floor tile could be set continuously from entry to shower with no shower curb. The bathroom floor is not porcelain tile but is a vinyl plank wood looking flooring. Obviously we couldn't carry that flooring into the shower so we found a porcelain tile that matched the bathroom flooring and turned it to act as a threshold into the shower.

The homeowners chose finishes that are modern and crisp with a soft feel and calmness of colors. The vinyl wood looking flooring adds to the design. The homeowner found a budget-friendly ceramic tile that gives the appearance of a handmade tile.

Bathroom Remodeler

© 2014-2020 ACTION SHOWER PAN.COM ALL RIGHTS RESERVED.

No trip charge for customers near me!

Read our customer reviews on our BETTER BUSINESS BUREAU PAGE